Sign into an existing account

Gotteem!

The comic is supposed to represent Jews screwing everyone.
Not necessarily Jews getting screwed harder and bringing everyone down.

Your head is screwed on right.

I forgot to mention that Torx bits are all measured in specific increments. So unlike Philips, you don't have 5 different sizes that all kinda fit but not really. With Torx it's a lot like wrenches. 6 fits with 6. 8 fits with 8. Which is one of the major reasons they are less likely to slip out and strip.

flat head I agree has some wiggle room. The problem with philips is the sizes are based on ratio of depth to width. So you can have drivers that seem like they are the right width but are too long, or vice versa. Which is what leads to the problem with excessive stripping.

Torx is superior and people who say shit like "but I only need 1-3 Philips to do all screws" are people who act like carrying a small set of 6-8 Torx bits is too difficult for them. It's basically nigger logic at that point.

Don't bring up cost either, you can buy a set of standard Torx sizes for $8-12. Throw one in the glove box of your car for all anyone cares.
I think the fact that we can't just swap everything over to Torx is probably due to this exact level of laziness.

Torx only strips "easily" if you use too small of a size (because too large won't even fix), but the thing is that too small of a size only strips the inner edges of the star and still leaves the outer edges to grab for the proper size.

No. Get rid of the inferior French system.