just shoveling out the ice under one wheel works most of the time if its in city limits
I've a snatch strap if they're in deep snow
Its the way of the road in the mountains. Last time I was there I drifted off road taking a corner too fast. Two trucks immediately came to my rescue and pulled me out with my snatch strap.
Paid it back a few days later coming back from snowboarding, found a woman on the side of the road with hazards on, her chains got all tangled up and her husband was 1.5 hours away. Took me a few minutes.
Always have a snatch strap regular metal chains don't do shit.
And know where your tow hook is.
Also if you're helping out, make the person you're helping attach the strap, so they can't sue you.
For those who are confused, this tool is for twisting OPs dick. Just put it on the tip really good. Maybe mash some foreskin in it if you aren't Jewish. (OPis, so he misses out on the fun) Then you just pull the trigger until it gets tight enough to break the nylon gears on the Ryobi.
Dude. There was a lot of names in those comments that we don't see around here anymore. I miss some of them. They made good contributions to this place. Thank you.
You're going to wreck your tools doing that. You definitely voided the warranty.
You're supposed to use a right handed wrench to put it in, and a left handed wrench to take it out. Also, wherever metal comes into contact with metal, you need to grease it first.
- You can always spot an idiot who doesn't know what they're doing by whether or not they grease their wrenches before using them.
Lithium or an all purpose grease is fine. But if you want to look like an expert, use clay and bacon grease, mixed together at a 3/38 ratio.
Obviously, grease your wrenches first. And then apply the same type of grease to the nut or bolt clockwise before tightening, and counter-clockwise before loosening.
If you have trouble turning the wrench, it's likely because you put the grease on backwards.
I can’t believe no one has pointed out he is not wearing safety gloves! He could catch COVID or worse catch the covid vaccine! He should be reported to CalOSHA
You ask where the wrench goes. When you say "wrench" are you talking about the dewalt impact wrench you're waving around in your video? What dewalt model is that? If it has the hammer option, I believe that might also be referred to as an impact hammer drill. In either case, the dewalt is made in China. Perhaps you are talking about a monkey wrench?
The other yellow wrench, featured in op's excellent video, which you should be careful not to forget is insulated crescent and has an imperial scale, (indeed, it is important we point out these finer details); goes on the gator grip.
It's best used in combination with vice grip pliers and sandpaper; grit 80.
I can't stand watching people abuse tools like that. Sure it "works" but that thing with the yellow handle is a tool to make bolt head round. Every body should know that.
[ + ] Anus_Expander
[ - ] Anus_Expander 0 points 3 monthsJan 9, 2025 08:42:29 ago (+0/-0)
[ + ] puremadness
[ - ] puremadness 0 points 3 monthsJan 9, 2025 02:16:53 ago (+0/-0)
[ + ] Kozel
[ - ] Kozel [op] 1 point 3 monthsJan 9, 2025 02:23:05 ago (+1/-0)
[ + ] lolxd
[ - ] lolxd 1 point 3 monthsJan 9, 2025 00:36:24 ago (+1/-0)
[ + ] ItsOk2bArian
[ - ] ItsOk2bArian 0 points 3 monthsJan 8, 2025 20:02:31 ago (+0/-0)
Good job, now back to doing the Lord's work of removing shopping cart wheels from bum wagons
[ + ] dirtywhiteboy
[ - ] dirtywhiteboy 0 points 3 monthsJan 8, 2025 19:46:40 ago (+0/-0)
[ + ] con77
[ - ] con77 1 point 3 monthsJan 8, 2025 19:25:22 ago (+1/-0)
[ + ] Kozel
[ - ] Kozel [op] 1 point 3 monthsJan 8, 2025 21:10:24 ago (+1/-0)
[ + ] Master_B
[ - ] Master_B 0 points 3 monthsJan 9, 2025 01:06:50 ago (+0/-0)
Like, hobos.
[ + ] Kozel
[ - ] Kozel [op] 3 points 3 monthsJan 9, 2025 01:28:22 ago (+3/-0)
I've a snatch strap if they're in deep snow
Its the way of the road in the mountains. Last time I was there I drifted off road taking a corner too fast. Two trucks immediately came to my rescue and pulled me out with my snatch strap.
Paid it back a few days later coming back from snowboarding, found a woman on the side of the road with hazards on, her chains got all tangled up and her husband was 1.5 hours away. Took me a few minutes.
Always have a snatch strap regular metal chains don't do shit.
And know where your tow hook is.
Also if you're helping out, make the person you're helping attach the strap, so they can't sue you.
[ + ] MaryXmas
[ - ] MaryXmas 0 points 3 monthsJan 8, 2025 19:23:50 ago (+0/-0)
[ + ] Kozel
[ - ] Kozel [op] 1 point 3 monthsJan 8, 2025 20:54:41 ago (+1/-0)
[ + ] MaryXmas
[ - ] MaryXmas 0 points 3 monthsJan 8, 2025 22:03:30 ago (+0/-0)
[ + ] foxtrot45
[ - ] foxtrot45 1 point 3 monthsJan 8, 2025 18:51:16 ago (+2/-1)
You got two Tennessee socket sets, and a power alabama socket set tool.
[ + ] the_old_ones
[ - ] the_old_ones 2 points 3 monthsJan 8, 2025 18:42:03 ago (+3/-1)
manhandle that bitch in there by hand like a real construction worker would do.
[ + ] dirtywhiteboy
[ - ] dirtywhiteboy 0 points 3 monthsJan 8, 2025 19:47:38 ago (+1/-1)
[ + ] RMGoetbbels
[ - ] RMGoetbbels 2 points 3 monthsJan 8, 2025 16:57:07 ago (+2/-0)
- I honestly didn't think it was possible, who would? but you've managed it.
You deserve an award nigger!
[ + ] Master_Foo
[ - ] Master_Foo -1 points 3 monthsJan 8, 2025 16:54:57 ago (+0/-1)
Just put it on the tip really good.
Maybe mash some foreskin in it if you aren't Jewish. (OPis, so he misses out on the fun)
Then you just pull the trigger until it gets tight enough to break the nylon gears on the Ryobi.
[ + ] Kozel
[ - ] Kozel [op] 2 points 3 monthsJan 8, 2025 17:44:22 ago (+2/-0)
[ + ] Peleg
[ - ] Peleg 3 points 3 monthsJan 8, 2025 19:26:08 ago (+3/-0)
Thank you.
[ + ] Master_Foo
[ - ] Master_Foo 0 points 3 monthsJan 8, 2025 17:54:03 ago (+1/-1)
Post video of you using the dick twisting machine.
[ + ] Not_C
[ - ] Not_C 2 points 3 monthsJan 8, 2025 16:40:17 ago (+2/-0)
You definitely voided the warranty.
You're supposed to use a right handed wrench to put it in, and a left handed wrench to take it out.
Also, wherever metal comes into contact with metal, you need to grease it first.
- You can always spot an idiot who doesn't know what they're doing by whether or not they grease their wrenches before using them.
[ + ] Kozel
[ - ] Kozel [op] 1 point 3 monthsJan 8, 2025 21:05:00 ago (+1/-0)
[ + ] Not_C
[ - ] Not_C 2 points 3 monthsJan 9, 2025 00:09:25 ago (+2/-0)
But if you want to look like an expert, use clay and bacon grease, mixed together at a 3/38 ratio.
Obviously, grease your wrenches first.
And then apply the same type of grease to the nut or bolt clockwise before tightening, and counter-clockwise before loosening.
If you have trouble turning the wrench, it's likely because you put the grease on backwards.
[ + ] Portmanure
[ - ] Portmanure 4 points 3 monthsJan 8, 2025 16:32:36 ago (+4/-0)
[ + ] Peleg
[ - ] Peleg 0 points 3 monthsJan 8, 2025 19:15:27 ago (+0/-0)
Without Safety Gloves he could catch Covid Chlamydia!
[ + ] Nosferatjew
[ - ] Nosferatjew 1 point 3 monthsJan 8, 2025 16:27:59 ago (+1/-0)
[ + ] FreeinTX
[ - ] FreeinTX 2 points 3 monthsJan 8, 2025 15:47:09 ago (+2/-0)
[ + ] Master_B
[ - ] Master_B 4 points 3 monthsJan 8, 2025 15:58:25 ago (+4/-0)
[ + ] ruck_feddit
[ - ] ruck_feddit 6 points 3 monthsJan 8, 2025 15:28:36 ago (+6/-0)
https://files.catbox.moe/3060sc.mp4
[ + ] Kozel
[ - ] Kozel [op] 5 points 3 monthsJan 8, 2025 15:33:50 ago (+5/-0)
[ + ] ruck_feddit
[ - ] ruck_feddit 4 points 3 monthsJan 8, 2025 15:35:44 ago (+4/-0)
[ + ] kammmmak
[ - ] kammmmak 2 points 3 monthsJan 8, 2025 15:23:36 ago (+2/-0)
Was OP holding back?
[ + ] albatrosv15
[ - ] albatrosv15 4 points 3 monthsJan 8, 2025 15:14:44 ago (+4/-0)
[ + ] observation1
[ - ] observation1 6 points 3 monthsJan 8, 2025 15:20:50 ago (+7/-1)
https://files.catbox.moe/3060sc.mp4
[ + ] SilentByAssociation
[ - ] SilentByAssociation 3 points 3 monthsJan 8, 2025 15:30:16 ago (+3/-0)
It's like an old married couple. More wholesome content like this, please.
[ + ] ruck_feddit
[ - ] ruck_feddit 1 point 3 monthsJan 8, 2025 15:32:44 ago (+1/-0)
[ + ] SilentByAssociation
[ - ] SilentByAssociation 1 point 3 monthsJan 8, 2025 18:32:11 ago (+1/-0)
[ + ] observation1
[ - ] observation1 -1 points 3 monthsJan 8, 2025 16:23:23 ago (+1/-2)
The other yellow wrench, featured in op's excellent video, which you should be careful not to forget is insulated crescent and has an imperial scale, (indeed, it is important we point out these finer details); goes on the gator grip.
It's best used in combination with vice grip pliers and sandpaper; grit 80.
Hope this helps answer your question.
[ + ] Sector2
[ - ] Sector2 2 points 3 monthsJan 8, 2025 17:46:11 ago (+2/-0)
[ + ] observation1
[ - ] observation1 1 point 3 monthsJan 8, 2025 17:49:28 ago (+1/-0)*
The distinction is yUGE
[ + ] ruck_feddit
[ - ] ruck_feddit 0 points 3 monthsJan 8, 2025 22:24:22 ago (+0/-0)
Wrong. That's an impact driver in my video. My impact wrench is on my workbench. Men can easily tell the difference.
Wrong, my hammer drill is also on the bench with my impact wrench.
https://files.catbox.moe/fyvn5o.jpg
This is an impact wrench: https://files.catbox.moe/1pk98b.jpg
[ + ] observation1
[ - ] observation1 1 point 3 monthsJan 8, 2025 22:29:21 ago (+1/-0)
[ + ] ruck_feddit
[ - ] ruck_feddit 0 points 3 monthsJan 8, 2025 22:34:10 ago (+0/-0)
[ + ] observation1
[ - ] observation1 -1 points 3 monthsJan 9, 2025 00:05:12 ago (+0/-1)
[ + ] ruck_feddit
[ - ] ruck_feddit 3 points 3 monthsJan 8, 2025 15:33:07 ago (+3/-0)
[ + ] observation1
[ - ] observation1 3 points 3 monthsJan 8, 2025 16:08:42 ago (+3/-0)
[ + ] ruck_feddit
[ - ] ruck_feddit 1 point 3 monthsJan 8, 2025 15:28:47 ago (+1/-0)
[ + ] Love240
[ - ] Love240 4 points 3 monthsJan 8, 2025 15:10:39 ago (+4/-0)
[ + ] HonkyMcNiggerSpic
[ - ] HonkyMcNiggerSpic 1 point 3 monthsJan 8, 2025 15:06:49 ago (+1/-0)
[ + ] CHIRO
[ - ] CHIRO 4 points 3 monthsJan 8, 2025 14:55:13 ago (+4/-0)
[ + ] germ22
[ - ] germ22 13 points 3 monthsJan 8, 2025 14:37:53 ago (+13/-0)
[ + ] ruck_feddit
[ - ] ruck_feddit 3 points 3 monthsJan 8, 2025 15:29:17 ago (+4/-1)
[ + ] MaryXmas
[ - ] MaryXmas 0 points 3 monthsJan 8, 2025 19:24:32 ago (+0/-0)
[ + ] Kozel
[ - ] Kozel [op] 2 points 3 monthsJan 8, 2025 14:45:03 ago (+2/-0)
Sounds like the bolt head is the one being abused.
The bolt head that is thrown away.
What's the problem?
[ + ] uvulectomy
[ - ] uvulectomy 2 points 3 monthsJan 8, 2025 18:19:42 ago (+2/-0)
[ + ] allAheadFull
[ - ] allAheadFull 2 points 3 monthsJan 8, 2025 21:26:51 ago (+2/-0)
[ + ] Sal_180
[ - ] Sal_180 -3 points 3 monthsJan 8, 2025 14:33:54 ago (+4/-7)